New recipes

Classic hot sandwich

Classic hot sandwich

Grease the bread with cream cheese, place a few slices of tomato and green onions, put a slice of ham, a slice of cheese, and on top of the scrambled egg. Garnish with olives and chopped dill. Bake for a few minutes or in the microwave until heated through.

It is delicious and nutritious. Take the place of a hearty dinner or leisurely breakfast.

Cost / portion: 3 Lei

Preparation time: 5 minutes



Classic hot sandwich - Recipes

Simmer the finely chopped onion and garlic in a little melted butter in the olive oil and leave until transparent.

Step 2

After finishing the sofritto (step 1) add the rice, increase the heat and "stir" until the rice becomes slightly translucent. Pour in the wine and stir constantly until the alcohol disappears. You can also use a white vermouth instead of wine.

Step 3

Season with salt and add the first hot soup polish and reduce the heat. As the rice cooks it will slowly absorb the liquid from the composition. The secret of a creamy risotto is to constantly mix and fill with hot liquid, polish with polish until the end.

Step 4

Remove from the heat and add a little butter and Parmesan cheese, stirring gently without crushing the rice grains. Cover and let the risotto rest for a while. I preferred to serve it with grilled asparagus and shrimp. It is preferable to be served immediately to preserve its velvety texture.


How to make cherry vodka at home

Before making cherries at home for this recipe, berries fall asleep in the glass.

Interspersed with sugar. We tied the bottle with gauze and put it in the sun for 6 weeks to ferment cherries.

Then pour cherry juice, bottled, sealed and put in a cool place.

Cherry, remaining in the bottle, fill the vodka, sealed and let stand at room temperature for 2 months.

Go a second brandy, filtered, bottled, sealed.

After 5-6 months, you can drink brandy.


How To Protect Yourself From Phishing Attacks

Your email spam filters may keep many phishing emails out of your inbox. But scammers are always trying to outsmart spam filters, so it’s a good idea to add extra layers of protection. Here are four steps you can take today to protect yourself from phishing attacks.

Four Steps To Protect Yourself From Phishing

  • Something you have - like a passcode you get via text message or an authentication app.
  • Something you are - like a scan of your fingerprint, your retina, or your face.

Classic hot sandwich - Recipes

This tutorial assumes that you have set the Control panel to Classic View. To see how to do this, click this link (opens in a new window): Set the Control Panel to Classic View

Windows XP let's you do something called a System Restore. This is when you take your computer back to an earlier time, typically done when something goes wrong with your PC. You simply select a Restore Point from a list (which we'll see how to do), and then restart. You cross your fingers and toes, and then hope the problem goes away! The settings for System Restore can be found on the System Properties dialog box.

To bring up System Properties, click Start and then Control Panel. From the Control Panel, double click Syst. Another way to bring up this box is to right click the My Computer on your desktop. From the menu, select Properties. A keyboard shortcut is to hold down the Windows Logo key in the bottom left of your keyboard. Keep it held down and press your Pause / Break key. Click the System Restore tab to see the following:

To activate System Restore, make sure there is NO tick in the box & quotTurn off System Restore on all drives & quot.

Clicking the Settings button just brings up a box with a slider on it. This lets you adjust how much hard disk space to let Windows XP use for your Restore Points:

If you have a hard drive that's about 200 gigabytes, then you may want to adjust the slider down. Allow about two gigabytes.

Create a Restore Point

Windows XP creates its own Restore Points, but it's a good idea to create your own. Create one every time you install software like Anti-Virus, or software that you're not sure about. Do the following.

Click Start & gt All Programs & gt Accessories & gt System Tools. You'll see the following menu:

Click on to System Restore and you should see the first screen of the Wizard:

Select & quotCreate a Restore Point & quot, and then click Next. You'll see this:

Type a name or description for your Restore Point, and click the Create button. Windows XP then tells you that it has created your Restore Point, and displays the date and time for it. Click Close and you're done!

Restoring Your Computer using a Restore Point

To use the Restore Point that you have created, or any one on the list, click Start & gt All Programs & gt Accessories & gt System Tools. Select & quotSystem Restore & quot from the menu:

Select & quotRestore my computer to an earlier time & quot, and then click Next at the bottom of the screen. You'll see this:

You can use the calendar on the left to select a date. Then on the right, you'll see all the available restore Points. Choose one from the list on the right, and then click Next. Windows XP will then ask you to confirm the details. If you're happy with your choice of Restore Point, then click Next to take you PC back to the settings you had on that day. After a restore, or will be well. At least, that's the theory!


How to Restore Your SNES Back to Its Default Settings

This SNES Classic Hack is 100% reversible so it is easy to set the device back to its default settings.

Step 1
Turn OFF the SNES Classic and pull the USB cord out of the power adapter. Then plug the cord into your computer.

Step 2
Turn ON your SNES Classic and wait for 10 to 20 seconds for it to be recognized within Hakchi CE. Once the button at the bottom left corner of the window turns to green, the connection is successful.

Step 3
On the Hakchi CE main menu, click Kernel & gt Advanced & gt Factory reset.

Step 4
A pop-up message appears. Click Yes.

Step 5
Wait for the process to be completed.

Click K once the reset is done.

Your SNES device should work exactly the way it did when you first pulled it out of the box.


Pasties recipe: classic or far from the classics

According to a legend that accompanies pies From the beginning of the first recipe of dishes was invented by nomads of the great armies of Genghis Khan, who during long passages required quite satisfactory and hot food, it is prepared quickly and without problems. recipe pasties invented by them, let it boil for a few minutes - it was enough to pour into the oil shield (of course, the problem if it was taken from the combat nomads in sufficient quantities, it was not yet on fully elucidated), heated over high heat and lower the improvised pieces of dough with filling wrapped in them. Has this legend the truth is unknown, but there is no doubt that juicy, pink and flavored lamb pies today changed enough, especially in terms of filling, but they were indescribably delicious.

The modern Pasties recipe asks you, with a filling of lamb and beef, veal and pork, chicken and potatoes, mushrooms and cheese. To prepare any version of these foods, they do not need sophisticated tools, a lot of time or special knowledge - you just need to take a good recipe.

For example, you can create so-called classics. For them, it is necessary to take a ready-made dough and stuffing for the filling - meat (onion. (700 gr.), Onion (350 gr.), A little water and a variety of spices. Ideally, of course, prepare this dish with lamb, but the use of any other type of meat is also allowed. Carried out this delicious recipe Ceburek, as follows: first, the preparation of the dough - you need to boil water, add oil and salt, mix in it at the same time half a cup flour, mixing pieces of dough in the end result was a soft and malleable. Next, add an egg, then knead the dough, gradually adding the rest of the flour. Until the mixture will insist (at least 1 hour), it's time to make a filling - meat and onions need to minced meat, mixed with spices, diluted with water to the filling was the best liquid. These classic pie recipes involve frying fairly quickly - over medium heat, in large amounts of oil until both sides are covered with a delicious crispy crust. Spread should be heated in oil, pre-covered with a tarpaulin and carefully folded filled with meat cake in half and lightly resulting in preformed air squeezing.

Another recipe - more original, although it may not have the right to bear the proud title of tchebourek. This dish prepared in the Caspian with fish, and should be ready to take the dough (1 kg.), Fish fillets (500 gr.), Onions (3 empty.), A small fish broth and spices. The dough should be carefully kneaded, cut into small pieces, roll them into tortillas, half of each put the filling. This mixture was passed through a mincer of fish and onion seasoned, slightly diluted with water. Moreover, the cake can be folded in half, catch the entire surface, giving them a crescent shape and fry in oil a lot on both sides. Such a Caspian Pasties recipe recommends cooking antenna before purchasing the attractive pale brown gold color.

In our country, is gaining more and more popular cheese-filled dishes. This dish is made from dough (900 kg.) Cheese (300 g.), Sugar (5 g.), Vegetable oil for frying and their salts. This delicious Ceburek cheese recipe resembles the previous ones, only half of the rolls spreading thin cakes do not need in minced meat and grated cheese curd with spices and a little water. zaschipyvaem cakes next to the intersection of the two edges and fry in oil until up to win on both "sides" of gold.


Format Meaning
text Enter the command exactly as shown.
text Replace with the requested information.
[text] Information contained within square brackets is optional to the command.
text | text Choose one of the options separated by the vertical pipe.

Halts the installation of a package and forces the installation status in the SOTI MobiControl console to report "Failed" when used in a SOTI MobiControl pre-install script.

See Using Package Studio for more information.

When used in a SOTI MobiControl pre-sync script, it stops the file synchronization process.

See Using File Sync Rules for more information.

To abort file synchronization if the first octet of the device's IP address is 169 (when the IP is in the form 169.254.0.1):

set firstoctet = ipoctet% IP% 1

if% firstoctet% == 169 abortsync

Displays or changes file attributes.

  • + sets an attribute
  • - clears an attribute
  • R is the read-only file attribute
  • A is the archive file attribute
  • S is the system file attribute
  • H is the hidden file attribute

attrib + A 1: database_info.txt

Changes the current directory.

To change to the Chocolate directory:

Imports a user-specified certificate of X.509 type, which could be either DER or Base64 encoded.

certimport -cert "filepath" -stype "storagetype" -storage "Storage"

  • filepath is the relative or absolute path of the certificate (.cer) file to import.
  • storagetype is the type of storage into which to import the certificate. Not all operating systems support all of the available options:
    • CSSCS is the current system service certificate storage
    • CSSCU is the current user certificate storage
    • CSSCUGP is the current user group policy certificate storage
    • CSSLM is the local machine certificate storage
    • CSSLME is the local machine enterprise certificate storage
    • CSSLMGP is the local machine group policy certificate storage
    • CSSS is the system services certificate storage
    • CSSU is the user's certificate storage
    • MY is the personal user certificate storage
    • ROOT is the root certificate storage.
    • CA is the certificate authority certificate storage
    • Trust is the trusted certificate storage
    • SPC is the software publisher certificate storage

    To import a certificate test.cer into current user storage of "MY" type:

    To import a certificate test.cer into root user storage of the local machine:

    certimport -cert "test.cer" -storagetype "CSSLM" -storage "ROOT"

    Copies one or more files to another location.

    On Windows Mobile / CE and Desktop Classic devices, files can be copied between desktop computers and mobile devices.

    On Android devices, files can only be copied locally.

    To copy all files with the extension .txt from the C: to the temp directory on the device:

    Deletes one or more files.

    To delete example.txt in the current directory:

    To delete all files with the extension .tmp in the current directory and its subfolders:

    Displays a list of files and subdirectories in a directory.

    To list the files in the Temp directory of the device:

    Displays messages or switches command echoing on or off.

    To turn command echoing off:

    To turn command echoing on:

    To display the message "Copying Files.":

    Closes the remote help desk application window.

    Finds a file on the device.

    Where / S applies the search to any subfolders

    To search for all files with a .txt file extension including subfolders:

    Finishes the current script without processing the rest of the package and reports package installation as successful to the deployment server. This is particularly useful in packages that involve wiping a device. This script command can be used to skip reinstalling the package but still report back as successfully installed to the deployment server.

    If a hard reset is initiated from a package's post-install script, the entire package will be reinstalled after the reset. A check can be included in the pre-install script that determines whether the package's files have already been installed.

    For platforms that support the if command, you use finishpkg conditionally: If a package's post-install script contains:

    md "1: PersistentStorage subfolder" reset / w

    then the pre-install script could contain a check to prevent the package from being reinstalled endlessly:

    if there is "1: PersistentStorage subfolder" finishpkg

    Directs script execution to a labeled line in a script.

    Only use this command in scripts.

    Displays a list of the commands supported and a brief description of each command.

    Performs conditional actions if the specified conditions are found.

    See The if Command for more information

    Returns the specified octet of an IP address and saves it to an environment variable, when called from within a SOTI MobiControl device script.

    To save the value of the fourth octet of an IP address to the environment variable myOctet:

    set myOctet = ipoctet 192.168.1.225 4 This gives myOctet the value 225

    To save the value of the first octet of the device's IP address to an environment variable in a device script:

    set myOctet = ipoctet% IP% 1 This gives myOctet the value 192 if the IP address is of the form 192.XXX.XXX.XXX

    Terminates a process that is currently running on the device.

    To terminate the pword.exe process on the device:

    Activates the lockscreen on a device for the specified number of minutes.

    To lock a device for 1 minute

    Sends a customs message to the SOTI MobiControl deployment server from the device. This message appears in the Logs tab of the Device Information panel in the SOTI MobiControl console.

    Where type is the type of the associated message and the options are:

    To send a notification to the SOTI MobiControl console at certain intervals during a software push:

    log "Starting Software Push"

    To create a directory named "test" from the current directory:

    To create test test1 test2 test3 recursively:

    mkdir test test1 test2 test3

    Moves a file from specified source location to specified destination location.

    To move and rename a file at the same time:

    To move folder to root folder:

    Prompts device user and waits for user input to continue.

    To show "Press any key to continue." On the device screen:

    Lists the running processes on the device.

    Deletes a key from registry on a device.

    To delete registry key HKEY_CLASSES_ROOT .2bp: :

    Deletes a value from the registry on a device.

    To delete registry value HKEY_CURRENT_USER Start test :

    Imports a registration file to the registry on the device.

    To import registration file c: test.reg to the device's registry:

    Exports the device registry subtree to a specified file.

    • -A specifies that the output file is in the ANSI format
    • -U specifies that the output file is in the Unicode format
    • drive: specifies the drive location where the registry subtree will be saved
    • path specifies the file path to the directory where the registry subtree will be saved
    • filename specifies the filename where the registry subtree will be saved
    • subtree specifies which part of the device's registry to export to a file. Possible values ​​are:
      • * specifies everything
      • HKLM specifies HKEY_LOCAL_MACHINE
      • HKCU specifies HKEY_CURRENT_USER
      • HKCR specifies HKEY_CLASSES_ROOT

      To export the HKEY_LOCAL_MACHINE subtree from the device registry to a UNICODE file C: hklm.reg :

      regsave -U C: hklm.reg HKEY_LOCAL_MACHINE

      Adds a key or value to registry on the device.

      To add a new key and two values ​​to that key:

      regset HKLM software apps testkey

      regset HKLM software apps testkey testvalue1 abc

      regset HKLM software apps testkey testvalue2 dword: 123

      Inserts a comment line in a script / batch file.

      To add a comment about pumpkins:

      rem The pumpkins are looking great this harvest

      To rename the file test.txt to test.bak :

      Changes all occurrences of a particular character or string in the specified file to a new character or string.

      replacetext filename string / characterToReplace newString / Character

      To remove the string "Device Psion" from the file My Device.txt in the temp folder:

      replacetxt " Temp My Device.txt" Psion Device

      Performs a soft or hard reset of the device.

      • / S is the default option and soft resets the device. Any desktop remote control sessions will also be terminated.
      • / H is used to hard reset a device running on the Windows Pocket PC or Windows CE platforms. It clears any data stored in the volatile memory. On Windows Mobile 5.0 and later devices this is equivalent to a soft reset. The real-time clock may also reset depending on the device make and model.
      • / W is used to wipe data stored on the device and reset the device to factory default settings.

      On Android Plus devices it is possible to specify a / delay parameter (in seconds): reset / S / delay 10

      If / delay parameter is not defined, the default value is 5 seconds

      To reset an Android Plus device to its factory settings in 30 seconds:

      Where / S removes any subdirectories

      On Android Plus and Linux devices, this command requires the / S option and will delete the specified item whether it is a directory or a file.

      To remove an empty directory named "test" from the current directory:

      To remove a directory named "test" and all of its contents from the current directory:

      Sets, edits or shows values ​​of environment variables.

      • set used alone, lists all environment variables
      • = deletes the environment variable it is used with
      • ++ increases the value of the specified environment variable. The variable must have an integer value.
      • - decreases the value of the specified environment variable. The variable must have an integer value.

      You can also use set to set the value of an environment variable to the string returned by the substring command:

      set environment variable = substring "string" startposition [numberOfCharacters] "

      To display all environment variables:

      To set the value of the environment variable Var1 to test:

      To set the value of environment variable Var2 to test:

      set Var2 = substring testing 1 4

      Launches the registered application for the given file extension.

      • -verb is the action you want the shell to execute
      • -w tells the command to wait for the specified length of time (in seconds) before executing

      To launch the registered application for the given file extension:

      shellexecute 1: temp temp.upg -open then shellexecute 1: temp temp.upg -run -w5

      Displays a message box on the device screen.

      • It does not support a complex showmessagebox that contains more than one command
      • It cannot return the user response
      • It does not support "if" and related keywords
      • message is the message displayed in the message box. Use quotation marks ("") if there are spaces in the message.
      • [timer] is the number of seconds until the message box disappears automatically. If you omit a timer value or add the keyword NO_TIMER, the message box will persist until the device user dismisses it.
      • [type] is type of of message box. Options are:
        • 1 displays an information window with an OK button
        • 2 displays a question window with Yes and No buttons
        • 3 displays a warning window with an OK button
        • 4 displays a question window with OK and Cancel buttons
        • 5 displays an error window with an OK button

        The return values ​​for the showmessagebox are stored in a global variable, ShowMessageBoxReturn This variable can be used in scripts as% ShowMessageBoxReturn% to execute actions based on user response. Possible return values ​​are IDYES, IDNO, IDOK, IDCANCEL. The value for this global variable does not change if the type is not 2 or 4.

        showmessagebox "This is a test message"

        To provide device information using a macro:

        showmessagebox "Your device's IP address is% IP%"

        To set a 3 second timer to your message:

        showmessagebox "This is a test message with a 3 second timer" 3

        To add YES and NO buttons to your message box with no timer

        showmessagebox "This is a test message with Yes / No button and no timer" NO_TIMER 2

        To provide followup actions to a user response to message box:

        Initiates sleep mode on the device for a set period. Only use this command in scripts.

        Where length is in seconds

        To set the device to sleep for 5 seconds:

        Initiates sleep mode on the device for a set period. Only use this command in scripts.

        Where length is in milliseconds

        To set the device to sleep for 3.5 seconds:

        Starts a program on the device. When the / wait option is specified, the script processor waits for the initiated program to terminate before executing the next command in the script.

        To start Pocket Word and wait until it is terminated:

        start / wait " software apps pword.exe"

        Shuts down the device. You can specify a delay (in milliseconds) before shutdown.


        Classic hot sandwich - Recipes

        Let’s say you have added a Size column in the appointment lists, turned off the Reading Pane, arranged messages by a customized criteria, or other settings before, and you need to restore the initial folder views at present. How do you deal with it? This article will talk about a couple of tricks about restoring initial folder views in Microsoft Outlook.

        Reset folder views with Rest View feature in Outlook 2010/2013/2016/2019/365

        If you want to restore folders ’initial view, you can apply the Reset View feature in Microsoft Outlook 2010 or later versions.

        1. In the Navigation pane, click to select a folder that you will reset its view, click View & gt Change View, and specify a view mode from the drop down list you will restore to initial view.

        2. Click View & gt Reset View. See screenshot:

        A warning dialog box will come out. Click the Yes button in the dialog box.

        Then the selected folder is reset to its original view at once. If you want to apply this view to other folders, please go on the following steps.

        3. Click View & gt Change View & gt Apply Current View to Other Mail Folders on the View tab. See screenshot:

        4. Then in the Apply View dialog box, please (1) check the mailboxes and their subfolders in the Apply View to These Folders: box, (2) it’s optional to check the option of Apply View to subfolders, and (3) click the K button.

        One click to show total numbers of items in all folders on the Navigation Pane in Outlook

        Normally, Outlook shows the numbers of unread items in each folder on the Navigation Pane. But, Kutools for Outlook’s All Folders Show Total Number of Items feature can help you show the total numbers of items in all folders with only one click. Click for 60-day free trial without limitation!

        Reset folder views in Outlook 2007

        The following steps will guide you to restore initial folder views in Microsoft Outlook 2007 at ease.

        1. Click to open the folder you want to restore its initial view, and click View & gt Current View & gt Messages or other view as you need.

        2. Click View & gt Current View & gt Customize Current View.

        3. In the popping up Customize View dialog box, please click the Reset Current View button at the bottom. See screen shot:

        4. In the coming warning dialog box, please click the K button.

        5. Click the K button in the Customize View: Messages dialog box to exit it.

        Restore initial views of all folders with cleaning all view settings

        There is an alternative method that can restore the initial views of all folders at once.

        1. Close the Microsoft Outlook, and open the Run dialog box with pressing the Win + R keys.

        2. Enter the outlook.exe / cleanviews in the Open: box, and click the K button.

        Then Microsoft Outlook opens with restoring the default views of all folders immediately.


        mail.com was launched in 1995 with the goal of providing unparalleled email functionality to our customers. Besides our email service we also offer news content, and on our website you will find the latest entertainment news, sport news, tech news and business news.

        Need help? Please feel free to visit our mail.com support pages anytime.

        Register your new email account here - It’s free!

        • Moreau
          • Games
          • Domains
          • Mail Collector
          • 30 MB Attachments
          • mail.com 25th anniversary
          • iPhone App
          • iPad App
          • Android App
          • MailCheck Chrome
          • Recover your password
          • Help Center
          • Contact Premium Support
          • mail.com blog
          • US
          • International

          Copyright © 2021 1 & amp1 Mail & amp Media Inc. All rights reserved.
          Copyright 2021 Associated Press. All rights reserved.
          This material may not be published, broadcast, rewritten, or redistributed.


          Video: 4 Korean Cafe Sandwiches 4가지 카페 샌드위치. Aeris Kitchen (November 2021).